Institut Gosa

  • Full Screen
  • Wide Screen
  • Narrow Screen
  • Povećati slova
  • Default font size
  • povećavanje slova
  • Latinica
  • English
Biblioteka | Publikacije i radovi | Objavljeni radovi | Objavljeni radovi u 2012.godini

Spisak radova istraživača Instituta Goša d.o.o. objavljenih u 2012. godini

Elektronska pošta Štampa PDF

U toku 2012. godine, istraživači zaposleni u Institutu Goša, su objavljivali sledeće radove:

Poglavlje u monografiji međunarodnog značaja (M14)

  1. R Ranković, S. Stojadinović, M. Sarvan, B. Kasalica, M. Krmar, J. Radić-Perić, M. Perić, A multidisciplinary study on Magnesium; J. Serb. Chem. Soc. 71(11) (2012), Sebian Chemical Society, ISSN 0352-5139, p.p 1483-1528

 

Radovi objavljeni u međunarodnom časopisu (M21)

  1. Ivana Vasović, Mirko Kozić, Mirko Maksimović, S.Maksimović, S.Štetić-Kozić, K.Maksimović, Determination of load distributions on main helicopter rotor blades and strength analysis of its structural components, Journal of Aerospace Engineering (2012), American Society of Civil Engineers, ISSN 0893-1321, DOI: 10.1061/(ASCE)AS.1943-5525.0000301
  2. Suzana Polić-Radovanović, Slavica Ristić, J. Stasić, M. Trtica, A study of Roman glass from Mala Barutana/Belgrade Fortress irradiated with pulsed CO2, Nd:YAG and ruby laser — Comparison*, Journal of Non-Crystalline Solids 22 (2012), 358, p.p 3048-3056, ISSN 0022-3093, http://dx.doi.org/10.1016/j.jnoncrysol.2012.07.034.
  3. M. Kozic, S. Ristic, B. Katavic, M. Puharic, Redesign of impact plates of ventilation mill based on 3D numerical simulation of multiphase flow around grinding wheel, Fuel processing technology, 2012, ISSN: 0378-3820, http://dx.doi.org/10.1016/j.fuproc.2012.09.027.

 

Radovi objavljeni u međunarodnom časopisu (M23)

  1. Slavica Ristić, Suzana Polić-Radovanović, Boris Katavić, Z. Nikolić, O. Ristić, A. Pacevski, Some experimental Results of Ruby Laser Beam Interaction with Neolithic Ceramics from Stubline, Serbia, Lasers in engineering, Volume 23, Number 5-6, 2012, pp. 403-412, 0898-1507 (print), ISSN: 1029-029X (online).
  2. Milorad Kočić, Mirko Blagojević, N.Marjanović, B.Stojanović, Z.Djordjević, L.Ivanović, V.Marjanović, Influence of the friction on the cyloidal speed reducer efficiency, Jurnal of the Balkan Tribological Association 2 18 (2012), p.p 217-227
  3. Ivana Vasović, Stašević M., Maksimović S., Gerić K., Burzić Z., Fatigue crack propagation models: numerical and experimental comparisons, Technics Technologies Education Management (2012), DRUNPP 2 7, ISSN1840-1503, p.p 801-810
  4. Slavica Ristić, Jelena T. Ilić, Djordje S. Čantrak, Ognjen R. Ristić, Novica Z. Janković, Estimation of laser- doppler anemometry measuring volume displacement in cylindrical pipe flow*, Thermal Science 4 16 (2012), Vinča Institute of Nuclear Sciences, Belgrade, ISSN 0354-9836, p.p 1027-1042, DOI: 10.2298/TSCI1204027R
  5. Marija F. Hribšek, Slavica Ristić, Bojana M. Radojković, Zoran Filipović, Ognjen R. Ristić, Modelling of chemical surface acoustic wave (saw) sensors and comparative analysis of new sensing materials, International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 8.9.2012, Int. J. Numer. Model. 2012, ISBN 1099-1204, DOI: 10.1002/jnm, http://onlinelibrary.wiley.com/doi/10.1002/jnm.1870/abstract.
  6. Suzana Linić, Mirjana Puharić, Lučanin Vojkan, Dragan D. Milković, Golubović Snežana, Determining the Influence of an Air Wave Caused by a Passing Train on the Passangers Standing at the Platform, International Journal of Heavy Vehicle Systems 3 19 (2012), Inderscience Publishers, United Kingdom, ISSN 1744-232X, p.p 299-313, http://www.inderscience.com/info/inarticle.php?artid=47918
  7. Bore Jegdić, J. P. Popić, Surface coverage determination of iron-phosphate coatings on steel using voltammetric anodic dissolution technique, J. Serb. Chem. Soc. 77 1-20 (2012), Serbian Chemical Society, ISSN 0352-5139, DOI: 10.2298/JSC120706096P, http://www.shd.org.rs/JSCS/JSCS_OnLine_First/5428_AM.pdf.
  8. Boris Katavić, Odanović Zoran D., Djurdjević Mile B., Pavlović-Krstić J., Arsić M., Some Applications of the Image Analysis in the Metal Material Science, Acta Physica Polonica A , 1 121 (2012), Polska Akademia Nauk, Instytut Fizyki, ISSN 0587-4246, p.p 111-113
  9. Bore Jegdić, Ljiljana S. Živković, Jovan P. Popić, Jelena B. Bajat, Vesna B. Mišković-Stanković, Electrochemical methods for corrosion testing of Ce-based coating prepared on AA6060 alloy by dip immersion method, J. Serb. Chem. Soc (2012), Serbian Chemical Society, ISSN 0352-5139.

Radovi objavljeni u međunarodnom časopisu (M24)

  1. Bore Jegdić, Biljana Bobić, Ana Alil, Naponska korozija metala I legura I njihovih zavarenih spojeva, deo I: uslovi nastanka naponske korozije, Zavarivanje I zavarene konstrukcije (2012), DUZS - Društvo za unapređivanje zavarivanja u Srbiji, ISSN 0354-7965, p.p 35-41, UDC: 621.791
  2. Mirjana Prvulović, Milan Prokolab, Ana Alil, Zlatan Milutinović, Sanacija čelične konstrukcije rešetkastog nosača autodizalice Pinguely TL969, Zavarivanje I zavarene konstrukcije (2012), DUZS - Društvo za unapređivanje zavarivanja u Srbiji, ISSN 0354-7965, p.p 89-93, UDC:105396743
  3. Bore Jegdić, Suzana Polić-Radovanović, Slavica Ristić, Ana Alil, Vladana Rajaković-Ognjanović, Corrosion of Cannon 75/27, model 1911. Deport, form the Collection of the Military Museum in Belgrade, FME Transactions (2012), Mašinski fakultet, Kraljice Marije 16, 11000 Beograd, ISSN1451-2092, p.p 145-151
  4. Bore Jegdić, Biljana Bobić, Ana Alil, Naponska korozija metala I legura I njihovih zavarenih spojeva, deo II:metode ispitivanja, Zavarivanje I zavarene konstrukcije (2012), DUZS - Društvo za unapređivanje zavarivanja u Srbiji, ISSN 0354-7965, p.p 115-122, UDC: 621.791
  5. Marko Ristić, Miloš Stanković, Miloš Ristić, Ana Alil, Sanacija celicne konstrukcije strele samohodne autodizalice TADAHO TL 200II/K, Zavarivanje I zavarene konstrukcije (2012), DUZS - Društvo za unapređivanje zavarivanja u Srbiji, ISSN 0354-7965, UDC: 621.791
  6. Slavica Ristić, A view in the invisible, Science, Teaching and Applications, Series: Special Issue - Address to Mechanics (2012), Guest editor: Katica R. (Stevanović) Hedrih, 40 (S1), p.p 87-119, DOI : 10.2298/TAM12S187R
  7. R.Jovičić, A.Sedmak, S.Sedmak, LJ. Milović, K.Jovičić, “Leakage of an Austenitic steel CO2 Storage Tank“, Structural integrity and Life Vol 12 (2012), No 2, Society for structural integrity and life, p.p 105-108, ISSN/ISBN 1451-3749, COBISS SR-ID 181616135

 

Saopštenja sa međunarodnog skupa štampana u celini (M33)

  1. Ivana Vasović, Marina Kutin, Mirko Maksimović, Marko Ristić, "Prediction of residual life assesment using thermography and crack growth analysis", Proceeding Applied Mechanics and Materials, Vol. 157-158 (2012), Trans Tech Publications, Switzerland, ISSN: 1660-9336, ISBN: 978-3-03785-380-1, 27.12.201-28.12.2011, p.p 202-209
  2. Ivana Vasović, Mirko Maksimović, Stevan Maksimović, Mirjana Djurić, Computation methods and software in fatigue life estimations of structural components under general load spectrum, ICDM - First International Conference on Damage Mechanics, June 25- 27. 2012(2012), Serbian Chamber of Engineers, Belgrade, Serbia, ISBN 978-86-86115-09-6, p.p 213-216
  3. Ivana Vasović, Mirko Maksimović, Stevan Maksimović, Marija Blazić, Mirjana Djurić, "Strength analysis of aircraft structures with respects of fatigue", 5th International Scientific Conference on Defensive Technologies, OTEH 2012, Belgrade, Serbia, September 18-19. 2012 (2012), Military Technical Institute, Republic of Serbia Ministry of Defence, ISBN 978-86-81123-58-4, p.p 75-79.
  4. Jasmina Obradović, Marko Ristić, Olivera Ilić, "Comparison between standard and green roofs for residental buildings in Serbia in respect to energy performance of buildings", Procedings of the XIV Simposium Young people and multidisciplinary research (2012), „Politehnica” University of Timsoara, ISSN 1849 6609, ROMANIA, 15.11.2012-16.11.2012, p.p 39-44.
  5. Milorad Kočić, Jasmina Obradović, Mirjana Prvulović, Ljiljana Radovanović, Marko Ristić, Marina Milovanović, BPMN & INTOUCH HMI software: A case study of modeling the flow measurement system and developing SCADA application in oil and gas industry, II International Conference Industrial Engineering and Environmental Protection (2012), Tehnicki fakultet “Mihajlo Pupin”, Zrenjanin, Univerzitet Novi Sad, ISBN: 978-86-7672-184-9, Srbija, 31.12.2012-31.12.2012, p.p 411-411.
  6. Bore Jegdić, Boris Katavić, Ana Alil, Biljana Bobić, Miroslav Radosavljević, Stress Corrosion Cracking of an Al-Zn-Mg-Cu Alloy after different Precipitation Hardening Treatments, 5th International scientific conference on defensive technologies, OTEH 2012, September 18-19.2012 (2012), Belgrade, Military Institute of Serbia, ISBN 978-86-8123-58-4, p.p 582-587.
  7. Bore Jegdić, Ana Alil, Biljana Bobić, Miroslav Radosavljević, Vesna Mišković-Stanković, Corrosion Testingof an Al-Zn-Mg-Cu Alloy after different Heat Treatment Regimes by the Application of Electrochemical Methods, 5th International scientific conference on defensive technologies, OTEH 2012, September 18-19.2012 (2012), Belgrade, Military Institute of Serbia, ISBN 978-86-8123-58-4, p.p 588-593.
  8. Мarko Ristić, Miloš Stanković, Miloš Ristić, Ana Alil, Reparation of Steel Contruction of Vehicle-Mounted Self-Propelled Crane's Telescopic Boom, Proceedings of the XXth International Conference on Material Handling, Construction and Logistics, Belgrade (2012), University of Belgrade, Faculty of Mechanical Engineering, ISSN 978-86-7083-763-8, Srbija, 03.10.2012-05.10.2012, p.p 309-312.
  9. Bore Jegdić, Marko Ristić, Ana Alil, Biljana Bobić, Corrosion Behaviour of an Al-Zn-Mg-Cu Alloy after different Heat Treatments, 2nd International conference Industrial Engineering and Environmental Protection 2012 (2012), Technical faculty Mihajlo Pupin, Zrenjanin, University of Novi Sad, ISSN 978-86-7672-184-9, Srbija, 31.10.2012-31.10.2012, p.p 121-128.
  10. M.S. Kozić, S. S. Ristić, M. A. Puharić, B. T. Katavić, Numericka analiza uticaja ugla lopatica centrifugalnog separatora na raspodelu ugljenog praha na gorionicima, International conferance Power plant 2012, Zlatibor (2012), Društvo termičara Srbije, ISSN 978-86-7877-021-0, http://e2012.drustvo-termicara.com/lista-prihvacenih-radova/9.
  11. Slavica Ristić, J. Ilić, O. Ristić, D. Čantrak, S. Tašin, Overview of uncertainty sources in flow velocity vector measurement by lDA, Proceed of 5th International Scientific Conference on Defensive Technologies OTEH 2012 (2012), ISBN : 978-86-81123-58-4 , Serbia, 18.09.2012-19.09.2012, p.p 43-48, http://www.vti.mod.gov.rs/oteh/elementi/rad/7-01.html.
  12. B. Radojković, M. Hribšek, S. Ristić, Saw sensors for explosive parameters detection, Proceed of 5th International Scientific Conference on Defensive Technologies OTEH 2012 (2012), Serbia, 18.09.2012-19.09.2012, p.p 640- 644, http://www.vti.mod.gov.rs/oteh/elementi/rad/6-08.html.
  13. Suzana Linić, Mirjana Puharić, Vojkan Lučanin, Dušan Matić, Research some aerodynamics phenomenon of high-speed trains in low-speed wind tunnel, The 3rd International Scientific and Professional Conference CORRIDOR 10 - a sustainable way of integrations Belgrade (2012), Institut Kirilo Savic Beograd, ISBN 978-86-83059-09-6, Serbia, 25.10.2012-25.10.2012, p.p 220-226, UDC: 625(082)(0.034.2).
  14. Mirko Kozić, Mirjana Puharić, Slavica Ristić, Suzana Polić-Radovanović, Numerička simulacija širenja CO2 i SO2 emitovanih iz dimnjaka Termoelektrane Kostolac B iznad muzeja Viminacijum, Zbornik sa medjunarodne konferencije Koridor 2012 (2012), Institut Kirilo Savic, Srbija, 24.10.2012-24.10.2012.
  15. Ljubinko Janjušević, Zdravko Vejnović, Miroslav Radosavljević, Definicija skladišta u savremeno proizvodno distributivnim centrima, 14 medjunarodna konferencija ICDQM-2012 (Upravljanje kvalitetom I pouzdanošću) (2012), Beograd, Srbija, ISBN 978-86-86355-10-2, p.p 370-375.
  16. Zoran Nikolić, Ljubinko Janjušević, Vladimir M. Shiljkut, A Possibility of Hybrid Supply of Autonomus Military Units With Electric Power, 5th International Scientific Conference on Defansive Technologies, OTEH 2012 (2012), Belgrade, ISBN 978-86-81123-58-4, COBISS.SR-ID 193395212, p.p 278 – 283.
  17. Ljubinko Janjušević, Zlatomir Živanović, Zoran Nikolić, Some Possible Aplications of Electric Drives in Military Vehicles, 5th International Scientific Conference on Defansive Technologies, OTEH 2012 (2012), Belgrade, ISBN 978-86-81123-58-4, COBISS.SR-ID 193395212, p.p 288 – 293.
  18. P.Hadžić, M. Radosavljević, LJ. Janjušević, On individual biodisel production and its compliance with EN 14214 standard, 7 simpozijum “Reciklažne tehnologije i održivi razvoj“ , Soko Banja (2012), Srbija, COBIS.SR-ID 193055756, p.p 561-565.
  19. S. Polić-Radovanović, M.Srećković, Lj.Janjušević, Robotics and Anthropological Research in Archaeology, Proceedings of abstracts, 1st International Conference RICH 2012 “ Robotic innovation for Cultural Heritage “,3-4 December 2012, Venice, Italy.
  20. Ljiljana Kostadinović, Jovanka Lević, Sava Pavkov, Effects of Artemisia Absinthium on Coccidia Infections in Chickens. Proceedings of 6th Central European Congress on Food. CEFOOD, Novi Sad, Serbia (2012), 23-26 May 2012. ISBN 978-86-7994-027-8, COBISS.SR-ID 271466759, p.p. 1600-1604.
  21. Ljiljana Suvajdžić, Jovanka Lević, Maja Velhner, Sava Pavkov, Aleksandar Potkonjak, Dubravka Milanov, Ivana Čabarkapa, Common food borne bacterial diseases of poultry, XV International Feed Technology Symposium, Novi Sad (2012), October, 2012, Proceedings, p.p 154-165.
  22. Ivana Čabarkapa, Jovanka Lević, Slavica Sredanović, Bojana Kokić, Dubravka Milanov, Ljiljana Suvajdžić, Sava Pavkov, Assesment of antimicrobial activity of eght essential oils against Salmonella enteritidis, XV International Feed Technology Symposium, Novi Sad (2012), October, 2012, Proceedings, p.p. 296 – 303

 

Saopštenja sa međunarodnog skupa štampana u izvodu (M34)

  1. Ivana Vasović, Marina Kutin, Mirko Maksimović, Marko Ristić, Numerical simulation in domains crack growth and welding process behaviors and comparative methods, Procedings of the XIV Simposium Young people and multidisciplinary research, Timsoara, Romania (2012), „Politehnica” University of Timsoara, ISSN 1849 6609, 15.11.2012-16.11.2012, p.p 15-15
  2. Milorad Kočić, Jasmina Obradović, Mirjana Prvulović, Ljiljana Radovanović, Marko Ristić, Marina Milovanović, BPMN &InTouch HMI software: a case study of business process management in Oil and Gas industry, Procedings of the XIV Simposium Young people and multidisciplinary research, Timsoara, Romania (2012), „Politehnica” University of Timsoara, ISSN 1849 6609,15.11.2012-16.11.2012, p.p 11-11.
  3. Milorad Kočić, Jasmina Obradović, Мirjana Prvulović, Мilan Prokolab, Мarko Ristić, "Calculation of temperature distribution of the powder particles in the spray deposition proces", Procedings of 11th Young Researchers’ Conference: Materials Science and Engineerin (2012), Institute of Technical Sciences of SASA, Belgrade, Srbija, 03.12.2012-05.12.2012, p.p 65-65, http://www.mrs-serbia.org.rs/images/book_of_abstracts.pdf.
  4. Milan Prokolab, Mirjana Prvulović, Bore Jegdić, Stevan Budimir, Z. Milutinović, "Welding parameters prediction by the analytical methods and use of numerical simulation software for GS36Mn5 steel", Procedings of 11th Young Researchers’ Conference: Materials Science and Engineerin (2012), Institute of Technical Sciences of SASA, Belgrade, Srbija, 03.12.2012-05.12.2012, p.p 64-64, http://www.mrs-serbia.org.rs/images/book_of_abstracts.pdf.
  5. Stevan Budimir, Bojan Gligorijević, Dragan Jovanović, Boris Katavić, Marina Kutin, Marko Ristić, Ana Alil, Studies of the Properties of Different Hard Coatings Resistant to Wear, The 14th International Symposium ISYPMR 2012, Timisoara (2012), „Politehnica” University of Timsoara, Rumunija, 15.11.2012-16.11.2012, http://www.acmv.ro/j/lang-ro/simpozion-2012/142-programul-general-al-simpozionului.html.
  6. Bore Jegdić, Suzana Polić-Radovanović, Slavica Ristić, Ana Alil, Vladana Rajaković-Ognjanović, Conservation of the Archaeological Finds from Roman Period, The 14th International Symposium ISYPMR 2012, Timisoara (2012), „Politehnica” University of Timsoara, Rumunija, 15.11.2012-16.11.2012, p.p 16-16, http://www.acmv.ro/j/lang-ro/simpozion-2012/142-programul-general-al-simpozionului.html.
  7. S. Ristić, S. Polić-Radovanović, B. Katavić, M. Kozić, The study of impact of thermal power plant Kostolac upon the archaeological site Viminacium, Proceedings from the [Second] Regional Scientific Conference "Risk Assesment of Cultural and Natural Heritage in the Region of South East Europe" (2012), Regional Alliance of ICOM for South East Europe (ICOM SEE), Srbija, 22.05.2012-26.05.2012, ISBN 978-86-6179-023-2, COBISS.SR-ID 191948812.
  8. Slavica Ristić, Bore Jegdić, Suzana Polić-Radovanović, The Research Of The Problem Of Metal Museum Exhibits Corrosion, Proceedings from the [Second] Regional Scientific Conference "Risk Assesment of Cultural and Natural Heritage in the Region of South East Europe" (2012), Regional Alliance of ICOM for South East Europe (ICOM SEE), 978-86-6179-023-2, Srbija, 22.05.2012-26.05.2012.
  9. Aleksandar Vencl, Bojan Gligorijević, Boris Katavić, Characterization and Comparison of the Carbides Morphologies in the Near-Surface Region of the Single- and Double-Layer Iron-Based Hardfaced Coatings, The 14th International Symposium ISYPMR 2012,November 15-16, Timisoara, Romania (2012), „Politehnica” University of Timsoara, ISSN 1849 6609, 15.11.2012-16.11.2012, p.p 6-6, http://www.acmv.ro/j/lang-ro/simpozion-2012/142-programul-general-al-simpozionului.html.
  10. Jasmiana Obradović, Milan Prokolab, Marko Ristić, Olivera Ilić, David Đurđević, Marina Milovanović, Financial mathematics as a basis for calculation and implementation in investment projects, Procedings of the XIV Simposium Young people and multidisciplinary research, Timsoara, Romania (2012), „Politehnica” University of Timsoara, ISSN 1849 6609, p.p 12-12.
  11. B. Gligorijević, B. Radojković, M. Vilotijević, M. Krmar, A. Alil, Deposition of the DLC structures in the low-pressure oxy-acetylene flat flame, The 11th Young Researchers Conference – Materials Science and Engineering, Beograd, (2012), Institute of Technical Sciences of SASA, Srbija, 03.12.2012-05.12.2012, p.p 62-62, http://www.mrs-serbia.org.rs/images/book_of_abstracts.pdf.
  12. Aleksandar Vencl, Bojan Gligorijević, Boris Katavić, Characterization and Comparison of the Carbides Morphologies in the Near-Surface Region of the Single- and Double-Layer Iron-Based Hardfaced Coatings, The 14th International Symposium ISYPMR 2012,Timisoara, Romania (2012), „Politehnica” University of Timsoara, ISSN 1224-6077, 15.11.2012-16.11.2012, p.p 6-6, http://www.acmv.ro/j/lang-ro/simpozion-2012/142-programul-general-al-simpozionului.html.
  13. Bore Jegdić, V. Mišković-Stanković J. Popić, Lj.S. Živković, J.B Bajat, Corrosion Stability of Polyester Coatings on AA6060 Pretreated with Different Ce-Based Coatings, 63rd Annual Meeting of the International Society of Electrochemistry (2012), International Society of Electrochemistry, Češka, 19.08.2012-24.08.2012.
  14. Bore Jegdić, J. Popić, V. Mišković-Stanković, J.B Bajat, The disbanding of powder polyester coating on steel and steel pretreated by zinc- and iron- phosphate coatings, 63rd Annual Meeting of the International Society of Electrochemistry (2012), International Society of Electrochemistry, Češka, 19.08.2012-24.08.2012.
  15. Bore Jegdić, Lj. Živković, J.B. Bajat, V. Mišković-Stanković, J. Popić, Corrosion Stability of Ce-based Coatings on AA6060, Third Regional Symposium on Electrochemistry South-East Europe (2012), International Society of Electrochemistry, Rumunija, 13.05.2012-17.05.2012.
  16. Katarina Jovičić, Iva Najvirt, Ana Alil, Milica Pilipović, Minimal required wall thickness comparative analysis of a stable tank made of stainless steel with and without strain hardening, Procedings of 11th Young Researchers’ Conference: Materials Science and Engineering, Belgrade, 05.12.2012, Institute of Technical Sciences of SASA, p.p 92, http://www.mrs-serbia.org.rs/images/book_of_abstracts.pdf.
  17. Bojana Radojković, Marija Krmar, Miroljub Vilotijević, Bojan Gligorijević and Ana Alil, Deposition Of The DLC Structures In The Low pressure Oxyacetylene Flat Flame, Book of abstracts of The Eleventh Young Researchers’ Conference Materials Science and Engineering and The First European Early Stage Researchers’ Conference on Hydrogen Storage, Belgrade, December 3rd-5th, 2012, ISBN 978-86-7306-122-1, Publisher: Materials Research Society of Serbia, Institute, p.p 67.
  18. Ivana S. Cabarkapa, Bojana M. Kokic, Jovanka D. Levic, Slavica A. Sredanovic, Sava T. Pavkov, Dragana V. Plavsić, Ana O. Varga, Influence of Origanum heracleoticum L. essential oil on reduction of Staphylococcus aureus using broth model media, 6th Central European Congres on Food, May, Novi Sad (2012.), Abstract book p.p. 88.
  19. Ljiljana Kostadinović, Jovanka Lević, Sava Pavkov, Effects of Artemisia Absinthium on coccidia infections in chickens, 6th Central European Congres on Food, May, Novi Sad (2012.), Abstract book p.p. 546.

 

Monografija nacionalnog značaja, monografsko izdanje građe, prevod izvornog teksta u obliku monografije (M42)

  1. M. Kozić, S. Ristić, M. Puharić, B. Katavić, Primena metoda numeričke simulacije strujanja u ventilacionom mlinu, kanalu aerosmeše i okolini termoelektrane, 2012, Institut Goša, Beograd, ISSN 978-86-86917-15-7.

 

Radovi objavljeni u vodećem časopisu nacionalnog značaja (M51)

  1. Ivana Vasović, Marina Kutin, Mirko Maksimović, Marko Ristić, Numerical simulation in domains crack growth and welding process behaviors and comparative methods, "Scientific bulletin of the „Politehnica” University of Timsoara, Romania, transactions on mechanics" 71, 57 (2012), „Politehnica” University of Timsoara, ISSN 1224 – 6077, p.p 75-80.
  2. Ivana Vasović, Marina Kutin, Milan Prokolab, Мarko Ristić, Miroslav Radosavljević, Ana Alil, Using the Numerical Simulations and Comparative Diagnostic Methods to Optimize the Product, "Scientific bulletin of the „Politehnica” University of Timsoara, Romania, transactions on mechanics" 71, 57 (2012), „Politehnica” University of Timsoara, ISSN 1224 – 6077, p.p 31-40.
  3. Milorad Kočić, Јasmina Obradović, Mirjana Prvulović, Ljiljana Radovanović, Marko Ristić, Marina Milovanović, BPMN &InTouch HMI software: a case study of business process management in Oil and Gas industry, "Scientific bulletin of the „Politehnica” University of Timsoara, Romania, transactions on mechanics" 71, 57 (2012), „Politehnica” University of Timsoara, ISSN 1224 – 6077, p.p 47-52.
  4. Jasmina Obradović, Milan Prokolab, Marko ristić, Olivera Ilić, David Đurđević, Marina Milovanović, "Financial mathematics as a basis for calculation and implementation in investment projects", "Scientific bulletin of the „Politehnica” University of Timsoara, Romania, transactions on mechanics" 71, 57 (2012), „Politehnica” University of Timsoara, ISSN 1224 – 6077, p.p 41-46.
  5. Bore Jegdić, Suzana Polić-Radovanović, Slavica Ristić, Ana Alil, Corrosion of archeological artefact made of forged iron, Metalurgical & Materials engineering (2012), Savez inženjera matalurgije Srbije, Kneza Miloša 9, 11000 Beograd, ISSN 0354-6306, p.p 233-240.
  6. Bore Jegdić, Suzana Polić-Radovanović, Slavica Ristić, Ana Alil, Vladana Rajaković-Ognjanović, Corrosion of an archaeological find from the Roman period in Serbia, Zaštita materijala (2012), Zaštita materijala, Inženjersko društvo za koroziju, ISSN 0351-9465, p.p 247-252, UDC: 620.197 (06.22)(497.1)=861.
  7. A. Alil, B. Jegdić, S. Polić-Radovanović, S. Ristić, V. Rajaković-Ognjanović, Conservation of the Archaeological Finds from Roman Period, Chemical bulletin of the „Politehnica” University of Timsoara, Vol. 57(71), Issue 1, Romania series of chemistry and environmental engineering (2012), „Politehnica” University of Timsoara, ISSN 1224-6018, p.p 35-37.
  8. Stevan Budimir, Bojan Gligorijević, Dragan Jovanović, Boris Katavić, Marina Kutin, Marko Ristić, Ana Alil, Studies of the Properties of Different Hard Coatings Resistant to Wear, Scientific bulletin of the „Politehnica” University of Timsoara, Romania transactions on mechanics (2012), „Politehnica” University of Timsoara, ISSN 1224-6077, p.p 53-59.
  9. Slavica Ristić, Suzana Polić-Radovanović, Bore Jegdić, Radovan Ristić, Bojana Radojković, Moisture Mapping of Aeronautical Museum Depot and Galleries by IR Thermography, Sci Tech Rev (2012), Sci Tech Rev, vol.62, no.2, Vojnotehnicki institut, Beograd, Srbija, p.p 84-90.
  10. Mirko Kozić, Suzana Polić-Radovanović, Slavica Ristić, Mirjana Puharić, Comparative analysis of wind direction impact on the air pollution in the region of thermal power plant Kostolac B by CFD, Ecologica 68, 19 (2012), Ecologica, Naučno-stručno društvo za zaštitu životne sredine Srbije - Ecologica, ISSN 0354-3285, p.p 563-570, UDC: 504.75.054:551.55(497.11).
  11. Aleksandar Vencl, Bojan Gligorijević, Boris Katavić, Characterization and Comparison of the Carbides Morphologies in the Near-Surface Region of the Single- and Double-Layer Iron-Based Hardfaced Coatings, Scientific bulletin of the „Politehnica” University of Timsoara, Romania transactions on mechanics (2012), „Politehnica” University of Timsoara, ISSN 1224-6077, p.p 15-20.
  12. Bore Jegdić, Suzana Polić-Radovanović, Slavica Ristić, Ana Alil, Corrosion Stability of Corrosion Products on an Archaeological Iron Artefact, International Journal of Conservation Science (2012), Alexandru Ioan Cuza University Publiching House Iasi-Romania, ISSN 2067-533X, p.p 241-248.
  13. Suzana Polić-Radovanović, Slavica Ristić, Mirko Kozić, Bojana Radojković Valorizacija uticaja termoenergetskih kompleksa na monumentalne objekte kulturne baštine, Energija-ekonomija-ekologija, br 5, (decembar 2012), str. 22-29, ISSN 0354-8651, UDC: 620.9

 

Radovi objavljeni u časopisu nacionalnog značaja (M52)

  1. Bore Jegdić, Slavica Ristić, Suzana Polić-Radovanović, Ana Alil, Corrosion and conservation of the wepons and military equipment, Vojnotehnicki glasnik (2012), Ministarstvo odbrane republike srbije medija centar „Odbrana“, ISSN 0042-8469, p.p 169-182, UDC: 623+355/359.

 

Saopštenje sa skupa nacionalnog značaja štampano u celini (M63)

  1. Ivana Vasović, Mirko Maksimović, Stevan Maksimović, Despot Janković, Neki aspekti primene i ispitivanja čvrstoće elemenata konstrukcija od kompozitnih materijala, Saveteovanje napredni materijali I mogućnosti njihove primene (2012), Srbija, Društvo hemičara, tehnologa i metalurga Požarevac i Narodna tehnika Požarevac, ISBN: 978-86-911159-3-7, 30.11.2012-30.11.2012, p.p 19-28.

 

Saopštenje sa skupa nacionalnog značaja štampano u celini (M64)

  1. Bore Jegdić, Biljana M. Bobić, Ana B. Alil, Miroslav R. Radosavljević, Corrosion of Welded Joints-Case Studies, Zavarivanje 2012 (2012), Divčibare, Srbija, DUZS - Društvo za unapređivanje zavarivanja u Srbiji, ISBN 978-86-82585-10-7, 09.10.2012-12.10.2012, p.p 48-48.
  2. Bore Jegdić, Biljana M. Bobić, Ana B. Alil, Test Methods for the Intergranular Corrosion Welded Joints, Zavarivanje 2012 (2012), Divčibare, Srbija, DUZS - Društvo za unapređivanje zavarivanja u Srbiji, ISBN 978-86-82585-10-7, 09.10.2012-12.10.2012, p.p 47-47.
  3. Stevan Budimir, Bore Jegdić, Boris Katavić, Mirjana Prvulović, Milan Prokolab, Zlatan Milutinović, Optimal parametars estimation by the analytical methods for the welding of the GS-36Mn5 steel, Zavarivanje 2012 (2012), Divčibare, Srbija, DUZS - Društvo za unapređivanje zavarivanja u Srbiji, ISBN 978-86-82585-10-7, 09.10.2012-12.10.2012, p.p 37-37.
  4. Bore Jegdić, Ljiljana S. Živković, Jovan P. Popić, Jelena B. Bajat, Vesna B. Mišković-Stanković, Corrosion stability and adhesion of polyester coating on AA6060 alloy pretreated with cerium-based layers, Golden Jubilee Meeting of the Serbian Chemical Society (2012), Serbian Chemical Society, Srbija, 14.06.2012-15.06.2012, p.p 31-31.
  5. Stevan Budimir, Boris Katavić, Mirjana Prvulović, Milan Prokolab, Marko Ristić, Distribution of heat flow parameters during spray deposition proces, Zavarivanje 2012 (2012), Divčibare, Srbija, DUZS - Društvo za unapređivanje zavarivanja u Srbiji, ISBN 978-86-82585-10-7, 09.10.2012-12.10.2012, p.p 50-50.
  6. R.Jovičić, A.Bukvić, D. Jovičić, K.Jovičić, Limitations of filler matrials for austenitic-ferritic welded joints selection, Zavarivanje 2012 (2012), Divčibare, Srbija, DUZS - Društvo za unapređivanje zavarivanja u Srbiji, ISBN 978-86-82585-10-7, 09.10.2012-12.10.2012, p.p 25-25.
  7. R.Jovičić, J.Markež, D.Jovičić, B.Grujić, K.Jovičić, Hard facing of layers wear resistant, filler materials and testing, Zavarivanje 2012 (2012), Divčibare, Srbija, DUZS - Društvo za unapređivanje zavarivanja u Srbiji, ISBN 978-86-82585-10-7, 09.10.2012-12.10.2012, p.p 44-44.

 

Novo laboratorijsko postrojenje, novo eksperimentalno postrojenje, novi tehnološki postupak (M83)

  1. Boris Katavić, Mirko Kozić, Slavica Ristić, Mirjana Prvulović, Milan Prokolab, Novi tehnološki postupak modifikacija radnih površina udarnih ploča ventilacionog mlina termoelektrane Kostolac B na osnovu numeričke simulacije multifaznog strujanja (2012).

Kalendar

Oktobar 2017
P U S Č P S N
25 26 27 28 29 30 1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31 1 2 3 4 5
You are here Biblioteka | Publikacije i radovi | Objavljeni radovi | Objavljeni radovi u 2012.godini