Institut Gosa

  • Full Screen
  • Wide Screen
  • Narrow Screen
  • Povećati slova
  • Default font size
  • povećavanje slova
  • Latinica
  • English
Biblioteka | Publikacije i radovi | Objavljeni radovi | Objavljeni radovi u 2011.godini

Spisak radova istraživača Instituta Goša d.o.o. objavljenih u 2011. godini

Elektronska pošta Štampa PDF

U toku 2011. godine, istraživači zaposleni u Institutu Goša, su objavljivali sledeće radove:

Poglavlje u monografiji međunarodnog značaja (M14)

  1. M. Davidovic, M. Kutin, S. Linic, U. Mioc, Z. Nedic, S. Sredic, A. Nikolic, D.Jovanovic, and Polycarpos Pissis, Advances in Diverse Industrial Applications of Nanocomposites, Chapter 3, Nanocomposite Based on Natural Materials, 2011.

 

Radovi objavljeni u međunarodnom časopisu (M21)

  1. B.V. Jegdić, J.B. Bajat, J.P. Popić, V.B. Mišković-Stanković, Corrosion stability of polyester coatings on steel pretreated with different iron–phosphate coatings, Progress in Organic Coatings 70 (2011) 127-133.
  2. B.V. Jegdić, J.B. Bajat, J.P. Popić, S.I. Stevanović, V.B. Mišković-Stanković, The EIS investigation of powder polyester coatings on phosphated low carbon steel: The effect of NaNO2 in the phosphating bath, Corrosion Science 53 (2011) 2872-2880.

 

Rad u istaknutom međunarodnom časopisu (M22)

  1. J.P. Popić, B.V. Jegdić, J.B. Bajat, Đ. Veljović, S.I. Stevanović, V.B. Mišković-Stanković, The effect of deposition temperature on the surface coverage and morphology of iron-phosphate coatings on low carbon steel, Applied Surface Science 257 (2011) 10855-10862.

 

Radovi objavljeni u međunarodnom časopisu (M23)

  1. Bore Jegdic, A. Alil, Z. Milutinović, Z. Odanović, B. Gligorijević, B. Katavić, Primena elektrohemijskih metoda za ispitivanje interkristalne korozije zavarenog spoja austenitnog nerđajućeg čelika 19Cr-9Ni, Hemijska industrija, 2011, st. 179-186, ISSN 0367-598X
  2. Kozic M., Ristic S. , Puharic M. , Katavic B. , Numerical simulation of multiphase flow in ventilation mill and channel with louvers and centrifugal separator, Thermal Science, Vol. 15, No.3, pp.677-689, 2011, DOI:10.2298/TSCI101203018K
  3. M. Puharić, S. Linić, D. Matić, V. Lučanin, Determination of braking force of aerodynamic brakes for high speed trains, Transactions of FAMENA XXXV-3 (2011), , ISSN 1333-1124, UDC 629.4.56: 629.4.077,

Radovi objavljeni u međunarodnom časopisu (M24)

  1. Z. Odanovic, V. Grabulov, M. Arsicć, M. Đurević, B. Katavić, Selection of the optimal fiiler material for on-site repair welding of the turbine shaft at the hydropower plant, Welding & welded structures , 149-166 ISSN 0354-7965, 2011
  2. Z. Nikolić, Filipović Z., Janjušević Lj., Stanje razvoja električnih i hibridnih vozila, energetski i ekološki aspekt njihove primene, Industrija, 4, 2011, 267-292
  3. B.V. Jegdić, B.M. Bobić, A.B. Alil Naponska korozija metala i legura i njihovih zavarenih spojeva, deo i: uslovi nastanka naponske korozije, Zavarivanje i zavarene konstrukcije, 1/2012, str. 39-45

 

Saopštenja sa međunarodnog skupa štampana u celini (M32)

  1. Marina Kutin, Slavica Ristic, Mirjana Puharic, Application of thermography in diagnosing behavior of metallic materials under dynamic loading conditions, International Conference “Structural integrity of welded structures” Timisoara Romania, 3-4 November 2011, ISIM Timisoara, Plenary session, ISSN: 1842-5518
  2. M. Prokolab, Z. Milutinović, N. Marković, D. Jovanović, M. Prvulović, J. Ignjatović, I. Vasović, Diagnosing stress state on the welded structure P frame of rotary excavator obtained by thermography, tensometry and fracture mechanics methods, The 5th International Conference Innovative technologies for joining advanced materials Timişoara, Romania, June 16-17, 2011, Proceedings, 2011., Sudura Publishing House Plenary Session , ISSN 1844-4938

Saopštenja sa međunarodnog skupa štampana u celini (M33)

  1. M.Kutin, S.Ristić, M.Puharić, M.Ristić, Tensile features of contractual hole in plate specimen testing by thermography and conventional method, Third Serbian 28th Yu) Congress on Theoretical and Applied Mechanics, Vlasina lake, Serbia, 5-8 july 2011.
  2. M.Kozić, S.Ristić, M.Puharić, B.Katavić, Comparison of Euler-Euler and Euler-Lagrange approach in numerical simulation of multiphase flow in ventilation mill, Third Serbian 28th Yu) Congress on Theoretical and Applied Mechanics, Vlasina lake, Serbia, 5-8 july 2011.
  3. M. Kozić, S.Ristić, M.Puharić, B.Katavić, M.Kutin, Numerical Visualization of Multiphase Flow in Ventilation Mill and Mixture Channel, The 8th Pacific on Flow Visualization and Image Processing, Moscow, 21.-25. august 2011., Proceedings, 119 PSFVIP8, Edt. Prof. DrI.A.Znamenskaya, MSU, Moskow, Russia, ISBN 978-5-8279-0093-1
  4. S. Ristic, M. Kozic, Optical and numerical visualization of supersonic 2d nozzle flow, The 8th Pacific on Flow Visualization and Image Processing, Moscow, 21.-25. august 2011 , Proceedings, 058 PSFVIP8, Edt. Prof. DrI.A.Znamenskaya, MSU, Moskow, Russia, ISBN 978-5-8279-0093-1,
  5. Kozic M., Ristic, S., Katavic B., Puharic M., Numerical simulation of multiphase flow around grinding wheel impact plates of ventilation mill, III International Symposium Contemporary Problems of Fluid Mechanics, May 12-13th, 2011, University of Belgrade, Faculty of Mechanical Engineering, Serbia
  6. Đ. S. Čantrak, S. S. Ristić, N. Z. Janković, LDA, classical probes and flow visualization in experimental investigation of turbulent swirl flow, Proceedings of the 10th anniversary international conference on accomplisments in electrical and mechanical engineering and information technology, 26-28 may, DEMI, Banja Luka, republika srpska, 2011, ISBN 978-99938-39-36-1, pp. 489-494
  7. Obradović, J., Linić, S., Ristić, M., Ilic, O., Milovanović, M., Using bpmn and intouch hmi 10.0. Software package for modeling flow measurement system for crude oil and petroleum products, I International Conference - Process Technology And Environmental Protection (PTEP 2011), Zrenjanin, 7th December 2011., p.339-346
  8. M. Kutin, I. Vasovic, M.Maksimovic, M. Ristic Prediction of residual life assesment using thermography and crack growth analysis; Proceed. Of ICMAM, 27-28.dec.2011, Hong Kong, Applied Mechanics and Materials Vols. 157-158 (2012) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMM.157-158.202 pp 202-209 (2012
  9. Maksimović S., Vasović I., Maksimović M., Đurić M.;Residual life estimation of damaged structural componentsusing low-cycle fatigue properties; Third Serbian (28th Yu) Congress on Theoretical and Applied MechanicsVlasina lake, Serbia, 5-8 July 2011; ISBN: 978-86-909973-3-6; pp 605 – 617
  10. Maksimović S.,Vasović, I,Burzić M,Đurić M. Determination of fracture mechanics parameters and residual life of cracked structural components; RIM Conference, University in Bihac 2011,ISSN:9958-624-16-8 pp121-126.
  11. S. Maksimović, I. Vasović, M. Maksimović, Some aspects to design of aircraft structures with respects to fatigue and fracture mechanics; 10 Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology; Faculty of Mechanical Engineering Banja Luka; ISBN:978-99938-39-36-1 2011; pp 191 – 201;
  12. S. Maksimović, I. Vasovic, M. Maksimovic, M. Djuric, Computation methods and software in fatigue life estimations of structural components under general load spectrum; icdm - International Conference on Damage Mechanics , Belgrade, Serbia, 25 – 27 June 2012.
  13. Obradović, J., Linić, S., Ristić, M., Ilic, O., Milovanović, M., using bpmn and intouch hmi 10.0. software package for modeling flow measurement system for crude oil and petroleum products, I International Conference - Process Technology And Environmental Protection (PTEP 2011), Zrenjanin, 7th December 2011., p.339-346
  14. P. Hadzic, M. Kutin, S. Borozan: Small scale production of biodiesel from waste vegetable oil-Transformation of one waste to another, Sardinia 2011 Thirteenth International Waste Management and Landfill Symposium, 3-7 October 2011, Margherita di Pula-Cagliari, Sardinia, Italy
  15. P. Hadžić, M. Kutin, M. Radosavljević, Biodizel u individualnoj proizvodnji –vredno gorivo ili otpad?, Međunarodni Simpozijum reciklažne tehnologije i održivi razvoj (SRTOR), str. 545-547, Sokobanja 2011.
  16. Vejnović, M. Pavlović, M. Davidović, Termoluminescentna kinetika nanofosfora,Međunarodna naučna konfrencija "Savremeni materijali 2011", Banja Luka 1.-2. Juli 2011
  17. S. Ristić, S. Polić-Radovanović, Mila Popović-Živančević, Bore Jegdić, Bojana Radojković, .application of thermography in detection of moisture in aeronautical museum depot 4. međunarodni naučno-stručni skup OTEH 2011 iz oblasti odbrambenih tehnologija, Vojno-tehnički institut, Beograd, 06-07. oktobar 2011. god.
  18. B. Radojković, S. Ristić, S. Polić-Radovanović, Ruby laser beam interaction with glass,12. Međunarodna Konferencija mladih istraživača u oblasti nauke o optičkim materijalima i materijalima iz oblasti visoke tehnologije (The 12th International Young Scientists Conference Optics and High Technology Material Science) SPO 2011 27.-30. oktobar, 2011. godine, Taras Shevchenko National University of Kyiv, Faculty of Physics, Chair of Optics, Kijev, Ukrajina.
  19. Ilić O., Cekić N., Jovanović A., Varnacular architecure of haouse in morava region as a model of re-establishmant ecological building conditions in niš region, Međunarodna konferencija “ the importance of place“, 13-16 jun 2011. godine, Sarajevo, Bosna I Hercegovina
  20. Jovanović A., Cekić N., Ilić O., Kompleksnost i mogućnosti za očuvanje urbarhitekture niša, Međunarodna konferencija “The importance of place“, 13-16 jun 2011. godine, Sarajevo, Bosna I Hercegovina
  21. Ilić O., Jovanović A. , Cekić N., Public buildings’ forms and structures as models for re-establishment of building’s connection with the environment, International Balkans Conferance on Challenges of Civil Engineering, BCCCE, 19-21 May 2011, EPOKA University, Tirana, ALBANIA
  22. Cekić N., Ilić O., Jovanović A., Building of student hostels at the beginning of 21st century , International Balkans Conferance on Challenges of Civil Engineering, Bccce, 19-21 May 2011, Epoka University, Tirana, albania
  23. Jovanović A., Cekić N., Ilić O., General aspects of sustainable re-use of buildings, International Balkans Conferance on Challenges of Civil Engineering, BCCCE, 19-21 May 2011, EPOKA University, Tirana, Albania
  24. Cekić N., Ilić O., Jovanović A., Language of vegetation colors in urbarchitecture, national science conference with international participation color and language Organized by Association “Group Color Bulgaria”, 23-24 June 2011., Sofia, Bulgaria
  25. Ilić O., Jovanović A. , Cekić N., Passive coolining methods for student campus design in nis climate, 5th international scientific conference “architecture, building – modern times” June 8-10, 2011., Varna, Bulgaria
  26. Cekić N., Ilić O., Jovanović A., Architectonic tendencies in formation of characteristic residential floor plans of student hostels, 5th international scientific conference “architecture, building – modern times” June 8-10, 2011., Varna, Bulgaria
  27. Jovanović A., Cekić N., Ilić O., Integration of cultural heritage into the process of student campus design, 5th international scientific conference “architecture, building – modern times” June 8-10, 2011., Varna, Bulgaria
  28. Ilić O., Jovanović A. , Djelić M., Passive coolining methods for shopping malls buildings in nis climate, The 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, July 4–7, 2011, Novi Sad, Serbia, ISBN 978-86-6055-016-5
  29. Jovanović A., Ilić O., Milić J., Djelić M., Day lighting in student dorms and recommendations for sustainable design,The 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, July 4–7, 2011, Novi Sad, Serbia, ISBN 978-86-6055-016-5
  30. Ristić M., Kočić M., Alil A., Ilić O., Ignjatović J., Distribution of loads of cycloid speed reducer, The XIIIth International Symposium"Young People and Multidisciplinary Research”, 10-11.November 2011, Timisoara, Romania, ISSN 1224-6077
  31. Ristić M., Kočić M., Vasović I., Milutinović Z., Ilić O., Obradović J., Testing the stability of portal crane, I International Conference “Process Technology and Environmental protection”, 7.12.2011., Zrenjanin, Serbia
  32. Ilić O., Jovanović A., Obradović J., Ristić M., Kočić M., Student housing design in respect to lighting requirements in nis, I International Conference “Process Technology and Environmental protection”, 7.12.2011., Zrenjanin, Serbia
  33. Obradović J., Linić S., Ristić M., Ilić O., Milovanović M., Using BPMN and intouch hmi10.0 software package for modeling flow measurement system for crude oil and petroleum products, I International Conference “Process Technology and Environmental protection”, 7.12.2011., Zrenjanin, Serbia
  34. Ljubinko Janjušević, Marina Kutin, Miroslav Radosavljević, The Strukture of Flexible Manafacturing Unit, the 7 th international research and dvelopment of mehanical elements and systems (IRMES 2011), Niš, str 349-354
  35. Ljubinko Janjušević, Zlatan Milutinović, M. Radosavljević, The demands of contemporary market, International Conference Dependablity and Quality Management ICDQM – 2011, Beograd, str. 646-652
  36. M. Prvulović, M. Prokolab, S. Budimir, M. Ristić, M. Radosavljević, D.Jovanović, Computation of pressure increase of the liquid carbon dioxide during storage time, 4th International scientific conference OTEH 2011, Beograd, str.668 – 671.
  37. A.Alil, B. Jegdić, Z. Milutinović, B. Katavić, Investigation of intergranular corrosion welded joint of austenitic stainless steel by electrochemical methods, The 9th international Conference “Structural integrity of welded structures” Timisoara Romania, 3-4 November 2011, SUDURA Publishing House Session I – Metallic structures, Paper 4, ISSN 1842-5518
  38. B. Gligorijevic, B. Katavic, A. Alil, B. Jegdic, M. Ristic, M. Prokolab , Analysis of a Floating-Head Heat Exchanger Bolts Failure, The 9th international Conference “Structural integrity of welded structures” Timisoara Romania, 3-4 November 2011, ISIM Timisoara Session I – Metallic structures, Paper 2, ISSN 1842-5518
  39. B. Gligorijević, B. Katavić, A. Alil, Z. Odanović, M. Đurđević, Plastic deformation and heat treatment of thin walled centrifugally cast high strength CrMoNb steel tubes Proceedings of the 43rd International October Conference on Mining and Metallurgy 2011, 333-337, ISBN 978-86-80987-87-3
  40. M. Prokolab, Z. Milutinovic, M. Kutin, M. Prvulovic, S. Budimir, I. Vasovic, Analysis of fracture mechanics parameters for rotary excavator’s  segment, The 9th International Conference “Structural integrity of welded structures” November 0304, 2011, Timişoara, Romania, Session I – Metallic structures, Paper 2, ISSN 1842-5518
  41. Z. Nikolić, R. Nikolić, D. Trifković, Electric Drive of Military River Boat Proceedings, 4th International Scientific Conference on Defansive Technologies, OTEH 2011, 2011, Military Technical Institute Serbia 294-299, 978-86-81123-50-8
  42. D. Nikolić, V. Šiljkut, Z. Nikolić, Hybrid power supply for smaller military units in isolated area, Proceedings of 4th International Scientific Conference on Defansive Technologies, OTEH 2011, Military Technical Institute Serbia, 417- 422, 978-86-81123-50-8
  43. V.B. Miskovic-Stankovic, J. Popic, J. Bajat, B. Jegdic, J. Han, Y. Xiong, D. Young, B. Brown, S. Nesic, „The Passivation Effect of Thin Iron Oxide Films in Carbonate and Phosphate Solutions“, XXVI European Corrosion Congress EUROCORR 2011, Stockholm, Sweden, 2011, Proceedings, No. 4473 (CD Rom) p. 1-4.
  44. R.Stojic, I.Vujic, Z.Filipovic, On the validation and testing of the training simulators and serious games, 4th International scientific conference on defensive technologies ,Belgrade, 6 – 7 October 2011.
  45. M.Jovanovic, X.Filipovic, S.Stupar, A. Simonovic, An Example of Equipment Subsystem For Aircraft Life Extending Model, 4th International scientific conference on defensive technologies ,Belgrade, 6 – 7 October 2011.
  46. Z. Filipovic, S, R.Stojic, T. Stojic, D.Vujic, Design and Implementation Of Modern Fligh Test Instrumentation System For Civilian And Military Aplication, Model, 4th International scientific conference on defensive technologies ,Belgrade, 6 – 7 October 2011.
  47. Dalibor Jovanović, Radovan Karkalić, Zoran Filipović, Aplication of contemporary tehnologies for heat stress prevention in hazard environment, 16th International conference safety of technical systems ,Niš, 27 –28, October 2011.

 

Saopštenja sa međunarodnog skupa štampana u izvodu (M34)

  1. M. Ristić, M.Prvulović, M. Prokolab, S. Budimir, M. Radosavljević, D. Jovanović, Z.Milutinović, Numerical simulation of the cold-water presure test and operating conditions for air reservoir, XIII Symposium young people and multidisciplinary research, Politehnica University Timisoara, 2011. Proceso of abstracte
  2. A. Alil, B. Katavic, M. Ristic, M. Kocic, D. Jovanovic, M. Prokolab, S. Budimir, Structural and mechanical properties of different hard welded coatings for impact plate for ventilation mill The 5th International Conference Timisoara – Innovative technologies for joining advanced materials,Timişoara, Romania, June 16-17, 2011, Proceedings, 2011,SUDURA publising house Section 1: Quality of welded joints and welded structures, ISSN 1844-4938
  3. M. Prvulovic, M. Ristic, M. Prokolab, M. Kocic, A. Alil, Z. Milutinovic, S. Budimir, Determination of thermal conductivity of the insulation materials using numerical calculation of the pressure increase, Thirteenth annual conference YUCOMAT 2011,Herceg Novi, Montenegro, September 5-9, 2011,Programme and the Book of Abstracts, Materials Research Society of Serbia, 137, http://www.mrs-serbia.org.rs/
  4. M. Davidovic, Z. Nedic, S. Sredic, S. Linić, M. Kutin, Comparison of Structure and Homogenity of Minerals in Balkan Peninsula, Thirteenth Annual Conference, Herceg Novi, Montenegro. Septembar 5-9, 2011.
  5. Z. Filipovic,G. Dikic, Design and Implementation of PCM/FM Telemetry Systems for Aircraft and Missile Testing During Flight Test Procedure, Fourteenth International Conference On Aerospace Sciences & Aviationtechnology, ASAT – 14, May 24 – 26, 2011, Cairo, Egypt,
  6. A. Alil, B. Gligorijević, M. Prvulović, S. Budimir, M. Ristić, M. Prokolab, Assesment of safety valve springs failure, Tenth Young Researchers Conference-Materials Science and Engineering, December 21-23, Program and The Book of Abstracts, Institute of Technical Sciences of SASA, 2011, 42, ISBN 978-86-80321-27-1

Radovi objavljeni u vodećem časopisu nacionalnog značaja (M51)

  1. M. Ristić, M.Prvulović, M. Prokolab, S. Budimir, M.Radosavljević, D. Jovanović, Z. Milutinović, Numerical simulation of the cold-water presure test and operating conditions for air reservoir, XIII Symposium young people and multidisciplinary research, Politehnica University Timisoara, 20011. Scientific bulletin of the „Politehnica“ University Timisoara.Vol 56 (70), Special ISSUE S1, 2011. ISSN 1224-6077. Editura Politehnica. Str. 73-76.
  2. M. Kutin, S. Ristić, M. Puharić, M. Vilotijević, M. Krmar, Thermographic testing of epoxy-glass composite tensile properties, Contemporery materials, II−2 (2011), pp. 88-93, UDK 66017:621.362.1]:539.42, doi:10.5767/anurs.cmat.110201.en.088K
  3. M. Kutin, S. Ristić, M. Prvulović, M. Prokolab, N. Marković, . R. Radosavljević, Application of thermography for estimation stress conditions of welded joints, FME Transactions (2011) 39, 133-138
  4. I. Vasović, M. Maksimović, M. Puharić, D. Matić, S. Linić, Structural Analysis of Aerodynamic Brakes in High-Speed Trains, Scientific Technical Review, 2011,Vol.61,No.2,pp.10-15, UDK: 629.113.6:656.7:519.6, COSATI: 13-06
  5. M. Davidović, S. Linić, A. Janićijević, Z. Nedic and U. Mioč, Fuel cells based on some proton dynamics properties of H2O2 compound, Contemporary Materials II−1 (2011), Akademija nauka i umjetnosti Republike Srpske, UDK 544.076.2:546.215, doi:10.5767/anurs.cmat.110201.en.040D, p.40-44
  6. M. Blažić, M. Maksimović, I. Vasović, Yasmina Assoul Stress Intensity Factors for Elliptical Surface Cracks in Round Bars and Residual Life Estimation;; Scientific Technical Review; Vojnotehnički institut Beograd; ISSN: 1820-0206; 2011; pp 63 – 67
  7. M. Kozić, S. Ristić, M.Puharić, B. Katavić, M. Prvulović, Comparison of Numerical and Experimental Results for Multiphase Flow in Duct System of Thermal Power Plant, Scientific Technical Review, 2010,Vol.60,No.3-4, pp.39-47
  8. A. Alil, B. Katavic, M Ristic, D. Jovanovic, M. Prokolab, S. Budimir, M. Kocic, Structural and mechanical properties of different hard welded coatings for impact plate for ventilation mill, Welding&Material Testing, no 3/2011, SUDURA Publishing House, 7-11, ISSN 1453-0392
  9. M. Kutin, S. Ristić, M. Puharić, M., Application of thermography in diagnosing behavior of metallic materials under dynamic loading conditions, Welding&Material Testing no 4/2011, SUDURA Publishing House, 2011, 12/20, ISSN 1453-0392
  10. A. Alil, Boris Katavic, Marko Ristic, Dragan Jovanovic, Milan Prokolab , Stevan Budimir, Milorad Kocic, Distribution of loads of cycloid speed reducer, Welding and Material Testing, 2011, 1, 7-11, ISSN 1453-0392
  11. B. Gligorijević, B. Katavić, Z. Odanović, M. Djurdjević, Properties of Heat Treated Centrifugally Cast High Strength Tubes, Metalurgija-MJoM, 2011, 221-230, ISSN 0354-6306, UDC: 621.746.2:621.643.23
  12. B. Jegdic, S. Polić-Radovanović, S.Ristić, A. Alil, Corrosion Processes, Nature and Composition of Corrosion Products on Iron Artefacts of Weaponry, Scientific Technical Review, 2011,Vol.61,No.2,pp.50-56
  13. M. Prokolab, Z. Milutinović, N. Marković, D. Jovanović, M. Prvulović, J. Ignjatović, I. Vasović, Diagnosing stress state on the welded structure P frame of rotary excavator obtained by thermography, tensometry and fracture mechanics methods, Welding&Material Testing no 3/2011, 25/29, SUDURA Publishing House, ISSN 1453-0392
  14. S. Ristić, S. Polić-Radovanović, M. Popović-Živanović, B. Jegdić, Neki primeri termografije zemljotresa na objektima zaštite kulturne baštine, Građevinski Materijali i Konstrukcije, 54 (2011) 83-96 (M51)
  15. T. Stojic, M. Hribsek, Z. Filipovic, Detection of Chemical Vapors Using Oscillator with Surface Acoustic Wave, FME Transactions ,88 ▪ VOL. 39, No 2, 2011

Radovi objavljeni u časopisu nacionalnog značaja (M52)

  1. M. Hribšek, S. Ristić, B. Radojković, Z. Filipović, Modelovanje i projektovanje filtara sa površinskim talasima i njihova primena u vojne svrhe, VTG, ( Br 3, 2011).
  2. Оbradovic, J., Babarogić, S., Vuckovic, M., Neskovic, S., Milovanovic, M., Business Process Modeling of transfer metering systems for crude oil and petroleum products using BPMN, Info M – Journal of information technology and multimedia systems, 2011.,number 37 UDC 004:519.8.
  3. B. Jegdić, S. Ristić, S. Polić-Radovanović, A. Alil, Corrosion and conservation of the weapons and military equipment, Vojnotehnicki glasnik, 1, 2011,

Radovi objavljeni  u časopisu nacionalnog značaja (M53)

  1. S. Polić-Radovanović, S. Ristić, M. Popović-Živanović, B. Jegdić, Termografska dijagnostika objekata zaštite kulturne baštine, Tehnička dijagnostika, br. 2, 2011, st. 33-40, UDC: 620.16:261.791.1/297.205, Visoka tehnička škola, Novi Beograd, UDC: 629.112-468-63, Cobiss SR ID 107426572, ISSN: 1451-1975

Saopštenje sa skupa nacionalnog značaja štampano u celini (M63)

  1. P. Hadžić, M. Kutin, M. Radosavljević: Biodizel u individualnoj proizvodnji-vredno gorivo ili otpad, Simpozijum Reciklažne tehnologije i održivi razvoj, Soko Banja, 18-21 Septembar 2011.
  2. Vejnović, M.B.Pavlović, M.Davidović, Termoluminescentni sistem sa dve vrste trapova, Zbornik radova sa XXVI simpozijuma DZZSCG, Tara, 29-31.03.2011., str. 326-329.
  3. Ilić O., Jovanović A., Cekić N., The language of color in green architecture, national science conference with international participation color and language Organized by Association “Group Color Bulgaria”, 23-24 June 2011., Sofia, Bulgaria.
  4. Jovanović A., Cekić N., Ilić O., The language of architecture in respect to color, national science conference with international participation color and language Organized by Association “Group Color Bulgaria”, 23-24 June 2011., Sofia, Bulgaria.
  5. T..Stojic, M. Hribsek, Z. Filipovic Detekcija gasova sa senzorima sa površinskim akustičnim talasom ,55 Konferencija ,ETRAN, Zbornik radova na CD-u, Teslić, 2011. g.
  6. Jovanović M., S.Pekmezović, Z. Filipović,Postupak određivanja raspoložive snage avionskog motora merenjem relevantnih parametara leta aviona, 55. Konferencija ,ETRAN, Zbornik radova na CD-u, Teslić, 2011. g

 

Saopštenje sa skupa nacionalnog značaja štampano u celini (M64)

  1. M. Davidović, S. Sredić, A. Daković, S. Linić, M.Kutin, Sličnosti i razlike u strukturi dva porozna minerala sa Balkana: montmorilonita i zeolita, Međunarodna naučna konferencija ,,Savremeni materijali 2011.” Akademija nauka i umjetnosti Republike Srpske, Banja Luka, 2011.
  2. M. Davidovic, S. Linic , Z. Nedic, S. Sredic , M. Kutin, Comparison of structure and homogenity of minerals in balkan peninsula, Thirteenth Annual Conference YUCOMAT 2011, Herceg Novi, 2011.

 

Kalendar

Oktobar 2017
P U S Č P S N
25 26 27 28 29 30 1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31 1 2 3 4 5
You are here Biblioteka | Publikacije i radovi | Objavljeni radovi | Objavljeni radovi u 2011.godini